Ir al contenido

Welcome!

Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

Sign up

Se marcó esta pregunta
1 Responder
15 Vistas

This is a place to discuss repower concerns and common issues that may arise when swapping engines both from Kohler-Rehlko and other brands to Rehlko. 

If you are swapping to another brand please use the appropriate forum. 

Avatar
Descartar
Autor Mejor respuesta

Common Considerations from my notes:

  1. Horsepower Rating or Displacement 
  2. Engine Orientation 
    1. Horizontal 
    2. Vertical
  3. Dimensional fit up 
    1. Mounting footprint 
    2. Length
    3. Width
    4. Height
    5. Crankshaft centerline
  4. Crankshaft:
    1. Diameter
    2. Length
  5. Air Filter Design 
    1. Design 
      1. Flat
      2. HDAC
      3. WAWB
      4. Customer Supplied
    2. Mounting
      1. Engine
      2. Remote
  6. Closure plate 
    1. Bolt circle
      1. Common Variations 
        1. 5.00"
        2. 6.50"
        3. 7.75"
    2. Pilot 
      1. Common Pilot Rings 
        1. 5.75"
        2. 6.438" (6-7/16")
        3. 7.0"
  7. Oil System 
    1. Remote filter 
    2. Oil Cooler
  8. Dipstick
    1. Fill Tube 
    2. Bayonet
    3. Dipstick
  9. Ignition Group 
    1. Charging amperage
    2. Key switch 
      1. Included 
      2. Installed 
        1. Mounted
        2.  loose
    3. Wiring Harness
      1. Requires RP1 kit?
      2. EFI Jumper 
        1. Required
        2. Part Number 
    4. Other Considerations 
      1. Anti-icing heater
      2. E-Gov
      3. ETB
      4. Dual Fuel
  10. Other Options and Considerations
    1. Short Block/ Long Block availability 
    2. Front shaft
    3. Controls 
    4. Fan screen
      1. Grass Chopper 
      2. Front shaft hole
    5. Muffler and shielding
    6. EPA regulations  
  11. Availability
    1. Current production
    2. Old stock. 


Avatar
Descartar
Publicaciones relacionadas Respuestas Vistas Actividad
0
oct 25
11